B & K 103-054HN Hose Bibb, 3/4 x 3/4 in MPT x Male Hose, PTFE Softgoods
Easy quarter turn On/Off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats and rust-resistant handle. 125 psi max working pressure. 3/4 in hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton.
B & K ProLine 110-223HC Gas Ball Valve, 1/2 in FPT, Brass
Two-piece body. Multi-directional flow, chrome-plated brass ball, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL listed. Threaded ends comply with ANSI B1.20.1. -20 to 300 deg F temperature range, quarter turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance.
B & K ProLine 110-224HC Gas Ball Valve, 3/4 in FPT, Brass
Two-piece body. Multi-directional flow, chrome-plated brass ball, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL listed. Threaded ends comply with ANSI B1.20.1. -20 to 300 deg F temperature range, quarter turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance.
BRASSCRAFT Gas Valve, Straight 3/8 OD. X 1/2-in. Fpt
Sl series, 3/8" o.d. X 1/2" female pipe thread gas valve, straight, non displaceable rotor.
Gas ball
Gas Dryer
3/8" OD Flare x 1/2" FIP
Brass
SOCKET FOOT VALVE PVC 4" EDPM
PVC coated metal cone inside o Operation pressure 0,025 bar o Operation temperature max. 60 ?C o Inline strainer material: PP o Corrosion-proof o Long durability o Service-free o Compact design o Radial installation and disassembly possible o Quick and precise opening and closing o Low-noise According to EG VCM safety regulation.
PVC True Union Ball Valve, Two Piece, PTFE Seat, EPDM Seal, 1/2" Socket/NPT
PVC body for less weight than valves made from metals
True union construction for in-place valve replacement
Standard port for smaller valve size and reduced cost
Inline valve for connecting two pipes going in the same direction
Socket weld connections to allow for a smooth bore and better fluid flow
PVC True Union Ball Valve, Two Piece, PTFE Seat, EPDM Seal, 3/4" Socket/NPT
PVC body for less weight than valves made from metals
True union construction for in-place valve replacement
Standard port for smaller valve size and reduced cost
Inline valve for connecting two pipes going in the same direction
Socket weld connections to allow for a smooth bore and better fluid flow
PVC True Union Ball Valve, Two Piece, PTFE Seat, EPDM Seal, 1" Socket/NPT
PVC body for less weight than valves made from metals
True union construction for in-place valve replacement
Standard port for smaller valve size and reduced cost
Inline valve for connecting two pipes going in the same direction
Socket weld connections to allow for a smooth bore and better fluid flow
PVC True Union Ball Valve with Full Port, Two Piece, PTFE Seat, EPDM Seal,
PVC body for less weight than valves made from metals
True union construction for in-place valve replacement
Full port flow for higher operating efficiency than standard port
Inline valve for connecting two pipes going in the same direction
Socket weld connections to allow for a smooth bore and better fluid flow
GF Piping Systems PVC True Union Ball Valve with Full Port, EPDM Seal,
The GF Piping Systems type 375 two-piece ball valve has a PVC (polyvinyl chloride) body that weighs less than valves made from metals, and it has EPDM (ethylene propylene diene monomer) O-rings for good resistance to weathering, ozone, UV, electricity, oils, water, steam, and some solvents. The PTFE (polytetrafluoroethylene) seat resists chemicals, moisture, and high temperatures. This valve connects two pipes going in the same direction and has true union connections that allow in-place valve replacement. It has a full port for reduced friction; the inner diameter of the valve is the same as the inner diameter of the pipes it connects to enable maximum operating efficiency. This valve includes socket weld connections with an internal recess on each inside diameter to allow for a smooth bore and better fluid flow. Valves in sizes 3/8" through 2" also include National Pipe Taper (NPT) threaded connections, which create tighter seals than straight threads. It is pressure rated to 232 pounds per square inch (psi) at 72 degrees Fahrenheit (F) using the socket connections and is pressure rated to 150 psi at 72 degrees F using the NPT threaded connections.
PVC True Union Ball Valve, Two Piece, PTFE Seat, EPDM Seal, 2" Socket/NPT
PVC body for less weight than valves made from metals
Standard port for smaller valve size and reduced cost
Inline valve for connecting two pipes going in the same direction
Socket weld connections to allow for a smooth bore and better fluid flow International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
VALVE CARTRIDGE PEERLESS
Single-function pressure balance cartridge
For use with Peerless tub and shower faucets
Replaceable without going behind the wall
Sold individually
Genuine Peerless repair part